Inkjet printers are very susceptible to damage, especially on the cartridge. Is to consider how to care for a good printer.
Here it is 11 tips for a printer can be long-lived
1. Use the printer as often as possible
Although you only print one or two pieces only, keep within 1 week of your inkjet printer to use and not idle. Inkjet printers are not used for too long will cause the ink in the cartridge head dry, so the ink clog. This will be difficult for you to print a document.
2. Take advantage of the software features built-Clean Head Printer
Software built inkjet printers usually have a head clean feature. Do a clean head on a regular basis to keep the output from the ink cartridge your head smoothly.
3. Keep your printer clean
Keep your printer from foreign objects, including dust. Clean regularly.
4. Turn off the printer using the Power
Turn the printer off a bad habit is to direct unplug power cable from the printer's power socket. By turning off the printer using the power button function to return the cartridge to a position where it should be, so that the printer head is not easily dried.
5. Make sure paper is not wrinkled and the corresponding
Avoid using the ink of the folded or crumpled. Any paper that is too thick is not recommended for use.
6. Do not touch the chip cartridge using a hand
Static electricity can move from your hand directly into the chip cartridge that would further disturb the component.
7. Keep the quality of the ink refill
Use refill ink cartridges are recommended for durability awake. Poor quality ink refill sometimes too thin and the print quality is not satisfactory.
8. Immediately refill the ink not to run out
Ink in the printer cartridge that is empty will cause the printer head dry so compiler holes clogged, so do not wait until the ink runs out, immediately return the contents of the ink when the ink has been no indication of low ink.
9. Note the condition of your printer wastepad
Replace wastepad disposal or use the outside so that the ink will not spill into the printer.
10. Do not arbitrarily disassemble the printer casing
Before you really an expert, do not try to disassemble your own printer as you become an expert not to dismantle it, but I can not plug it back soon.
11. Place the printer away from things liquid
Like coffee or tea while jamming the print? Be careful, do not let the coffee poured into the printer, hehehe........ Better not put coffee, tea, or whatever liquids near the printer.
0 comments:
Post a Comment